Fitting Engineered Wooden Flooring

When you purchase the floor, you can decide to undertake the installation process instead of paying for it. If you have installed other home gadgets or floors, you know that this task is hard if you do not follow the simple rules.

In addition, the end might not be as expected especially if you miss one of the stages. For that reason, gather as much information as you can before fitting engineered wooden flooring. Read the reviews and website articles of various companies. You can also go through the manual provided by the company from which you bought the floor. When making the purchase, you must have estimated the size of the floor and added some extras for the side. When you bring the purchase to the house, do not store it in areas it can soak in the humid conditions.

Preparations before fitting engineered wooden flooring

When you start fitting engineered wooden flooring, check the surface and take off any item that night interfere with the installation. You have to remove the mat on the surface or other heavy equipment in the room. Clear the area you will make the installation. Repair any worn out areas or ones with loose chippings. Ensure that the floor is firm and it does not have sloppy areas. Incase of any damages, cover the holes with concrete if you are working with a concrete floor. Gather all the equipments like the hammer, nails, stapling gun, the felt and the vacuum cleaner.

Area cleaning before fitting engineered wooden flooring

Sweep or vacuum clean the room and check to make sure the doorframe does not have any loose casings at the bottom. If there are, use the saw to level the place and then clean the room. If you have waste under the floor you will install, it will start squeaking because of the presence of air between the floor and the wood you have installed. Water might also seep in through the holes and onto the ground.

Placing the felt before fitting engineered wooden flooring

You are still preparing the surface for fitting engineered wooden flooring. Fix the felt over the floor and staple it into place leaving no gaps between. You need to place the wood on top of the felt from one end of the room. Do not leave gaps on the wall but instead use a level to check the straightness of your installation. One you have at least three wood pieces in place, hammer them into place and do not have any piece above the other. They should be flat on the floor. For areas you cannot staple such as at the end of the walls, use the toenail to fix the wood. Go over the installation checking for the gaps especially next to the walls or around the doors.

Essentially, you need to make sure there are no nails or staples protruding onto the surface or they will be a safety hazard to the people. In addition, the wood should be firmly in place or it will soon come out and you can start the repair process before you enjoy having a new floor in your house.